Book Service

Find Your Next Step.

Popular places to start

Barnes 2SEV, 3SE & 3SEV Sewage Ejector Pumps — representative manufacturer product

Representative manufacturer family image. Confirm the exact configuration in your quote.

Barnes

Barnes 2SEV, 3SE & 3SEV Sewage Ejector Pumps

Sewage and wastewater lift from building pits; series differ in impeller, discharge and solids capability. Ask HTS for a replacement quote or a second opinion for your Toronto or GTA building.

Model / Family
2SEV / 3SE / 3SEV sewage ejector pumps
Project
Condo and commercial building assessment, repair review or replacement

Review the model. Compare the scope. Plan the next step.

Send the full nameplate and installation photos. Current supply, pricing and installation timing are confirmed in your quotation.

Barnes Building Pumps

Building Drainage Pump Replacement Options

  • 2SEV, 3SE and 3SEV sewage families
  • Different seal, impeller and motor options
  • Selection must match discharge and solids requirements

Compare Your Repair Or Replacement Proposal

A sewage ejector replacement involves the pump, its pit connection and the controls that start and alternate it. Ask HTS to review the complete Barnes designation and the scope for lifting, isolation and recommissioning.

Model Reference Guide

Barnes Pump Models And Series

Choose a model to ask HTS about your building.

Manufacturer model references. The complete code, electrical configuration and selected duty must be confirmed for your building.

Model / SeriesWhat To Confirm
2SEV512L Part 1049700.5 hp; single seal; 120 V / 1 phase
2SEV522L Part 1049710.5 hp; single seal; 240 V / 1 phase
2SEV1022L Part 1049821 hp; single seal; 240 V / 1 phase
2SEV1522L Part 1041871.5 hp; single seal; 240 V / 1 phase
2SEV2022L Part 1041902 hp; single seal; 240 V / 1 phase
3SE514L Part 1048920.5 hp; 1750 rpm; 120 V / 1 phase
3SE1522L Part 1327751.5 hp; 3450 rpm; 230 V / 1 phase
3SEV512L Part 1049920.5 hp; 3450 rpm; 120 V / 1 phase
Pump Replacement Selection

What To Consider Before You Change Your Sump Or Sewage Pump?

  • Record full model and serial number; L and DS identify different seal arrangements
  • Check actual curve, solids passage, discharge/rail coupling and basin geometry
  • Verify controls, lead/lag alternation, alarm, motor voltage and phase

Send These Details For Your Second Opinion

  1. The building address and the pump’s location or system served.
  2. Clear pump, motor and controller nameplates, plus the current fault or symptoms.
  3. The proposed model and itemized replacement scope, if you already have a quote.
  4. Installation photos showing connections, controls and access.

We can discuss the proposed equipment and work with you. Hydraulic selection or unresolved faults may require a site assessment before a firm recommendation.

Explore Building Mechanical Maintenance

Download Barnes PumpTechnical Documents Here

Manufacturer literature and an HTS review of the proposed pump and installation scope.

Manufacturer Literature

Barnes Plumbing Solutions catalogue

Review the applicable model family, document revision and selected configuration with your quotation.

PDF
Keep Exploring

Compare Building Pump Options

View All Building Pumps
Pump Replacement Questions

Before You Approve A Pump Quote

Can HTS Review A Barnes Pump Replacement Quote?

A sewage ejector replacement involves the pump, its pit connection and the controls that start and alternate it. Ask HTS to review the complete Barnes designation and the scope for lifting, isolation and recommissioning. Send the full equipment details and proposed scope to begin.

Is The Model Number Enough To Select A Replacement?

The full model number is a starting point. We also need the required flow and pressure, electrical supply, materials, controls and installation details. A matching horsepower or a similar family name does not establish an equivalent replacement.

Need A Second Opinion On Your Building Pumps?

Send the model and proposed scope. We’ll help you plan the next step.