Book Service

Find Your Next Step.

Popular places to start

Barnes SP33, SP50 & SP75 Sump Pumps — representative manufacturer product

Representative manufacturer family image. Confirm the exact configuration in your quote.

Barnes

Barnes SP33, SP50 & SP75 Sump Pumps

Groundwater and dirty-water sump duty with limited solids; building drainage locations where the verified pump curve and pit conditions fit. Ask HTS for a replacement quote or a second opinion for your Toronto or GTA building.

Model / Family
SP33 / SP50 / SP75 sump pumps
Project
Condo and commercial building assessment, repair review or replacement

Review the model. Compare the scope. Plan the next step.

Send the full nameplate and installation photos. Current supply, pricing and installation timing are confirmed in your quotation.

Barnes Building Pumps

Building Drainage Pump Replacement Options

  • SP33, SP50 and SP75 sump families
  • Manual and automatic float configurations
  • Drainage duty with limited solids

Compare Your Repair Or Replacement Proposal

Repeated sump-pump cycling, a failed float or water left in a pit can call for different repairs. HTS can review the existing Barnes unit and proposed replacement against the pit, discharge route and control arrangement.

Model Reference Guide

Barnes Pump Models And Series

Choose a model to ask HTS about your building.

Manufacturer model references. The complete code, electrical configuration and selected duty must be confirmed for your building.

Model / SeriesWhat To Confirm
SP33 Part 1125471/3 hp; manual; 120 V, single phase, 60 Hz
SP33A Part 1125491/3 hp; wide-angle float
SP33AX Part 1125501/3 hp; wide-angle float; 20-foot cord
SP33VF Part 1125511/3 hp; vertical float
SP50X Part 1128751/2 hp; manual; 20-foot cord
SP50AX Part 1128771/2 hp; mechanical float; 20-foot cord
SP50VFX Part 1128791/2 hp; vertical float; 20-foot cord
SP75X Part 1153683/4 hp; manual
Pump Replacement Selection

What To Consider Before You Change Your Sump Or Sewage Pump?

  • Required flow at actual total dynamic head, including discharge height and pipe friction
  • Float clearance and minimum pit diameter; automatic versus panel-controlled operation
  • Voltage, cord length, check valve, alarm and duplex/backup needs

Send These Details For Your Second Opinion

  1. The building address and the pump’s location or system served.
  2. Clear pump, motor and controller nameplates, plus the current fault or symptoms.
  3. The proposed model and itemized replacement scope, if you already have a quote.
  4. Installation photos showing connections, controls and access.

We can discuss the proposed equipment and work with you. Hydraulic selection or unresolved faults may require a site assessment before a firm recommendation.

Explore Building Mechanical Maintenance

Download Barnes PumpTechnical Documents Here

Manufacturer literature and an HTS review of the proposed pump and installation scope.

Manufacturer Literature

Barnes SP33 / SP50 / SP75 sales sheet

Review the applicable model family, document revision and selected configuration with your quotation.

PDF
Keep Exploring

Compare Building Pump Options

View All Building Pumps
Pump Replacement Questions

Before You Approve A Pump Quote

Can HTS Review A Barnes Pump Replacement Quote?

Repeated sump-pump cycling, a failed float or water left in a pit can call for different repairs. HTS can review the existing Barnes unit and proposed replacement against the pit, discharge route and control arrangement. Send the full equipment details and proposed scope to begin.

Is The Model Number Enough To Select A Replacement?

The full model number is a starting point. We also need the required flow and pressure, electrical supply, materials, controls and installation details. A matching horsepower or a similar family name does not establish an equivalent replacement.

Need A Second Opinion On Your Building Pumps?

Send the model and proposed scope. We’ll help you plan the next step.