Book Service

Find Your Next Step.

Popular places to start

CAMUS Dynaforce commercial boiler — manufacturer product image

Representative CAMUS Dynaforce boiler. Appearance varies by size and configuration.

CAMUS Commercial Boilers

CAMUS Dynaforce Commercial Boiler

Central hydronic heating plants; separate DRW models provide dedicated hot-water service. Ask HTS about boiler replacement, installation and service for your Toronto or GTA building.

Model / Family
Dynaforce
Project
Condo and commercial building boiler replacement or service

Boiler Quotes For Toronto & GTA Buildings.

Send your boiler nameplate and project details. Equipment selection, supply, pricing and installation timing are confirmed in your quotation.

CAMUS Boiler Systems

Dynaforce Boiler Replacement Options

A fully condensing commercial watertube boiler with a vertical stainless steel heat exchanger for central hydronic plants.

  • Welded 439 stainless steel heat-transfer tubes with 316L waterways.
  • Manufacturer specifies operation with return water down to 40°F.
  • Category II or IV venting options.
Published Model References

CAMUS Dynaforce Boiler Models

Select a model to include it in your enquiry.

Published heating size codes from CAMUS 99-0129 Rev.10 are shown; the hydronic family is designated DR(H), and the manual identifies DRH models. The submittal lists 10:1 minimum-input data for sizes 600–1800 and 5:1 data for all sizes. Confirm the supplied turndown configuration and full model code. MBH means thousands of BTU per hour. Input is fuel input, not delivered heating output.

Model / Size ReferenceInput (MBH)Selection Notes
DRH600600Published heating size code; maximum input. Base identifier shown; final option suffixes vary. Published size: 0600.
DRH800800Published heating size code; maximum input. Base identifier shown; final option suffixes vary. Published size: 0800.
DRH10001000Published heating size code; maximum input. Base identifier shown; final option suffixes vary. Published size: 1000.
DRH12001200Published heating size code; maximum input. Base identifier shown; final option suffixes vary. Published size: 1200.
DRH14001400Published heating size code; maximum input. Base identifier shown; final option suffixes vary. Published size: 1400.
DRH16001600Published heating size code; maximum input. Base identifier shown; final option suffixes vary. Published size: 1600.
DRH18001800Published heating size code; maximum input. Base identifier shown; final option suffixes vary. Published size: 1800.
DRH20002000Published heating size code; maximum input. Base identifier shown; final option suffixes vary. Published size: 2000.
DRH25002500Published heating size code; maximum input. Base identifier shown; final option suffixes vary. Published size: 2500.
DRH30003000Published heating size code; maximum input. Base identifier shown; final option suffixes vary. Published size: 3000.
DRH35003500Published heating size code; maximum input. Base identifier shown; final option suffixes vary. Published size: 3500.
DRH40004000Published heating size code; maximum input. Base identifier shown; final option suffixes vary. Published size: 4000.
DRH45004500Published heating size code; maximum input. Base identifier shown; final option suffixes vary. Published size: 4500.
DRH50004999Published heating size code; maximum input. Base identifier shown; final option suffixes vary. Published size: 5000.
Commercial Boiler Selection

What To Consider Before You Change Your CAMUS Boiler?

  1. Check required flow, head loss and plant supply/return temperatures.
  2. Confirm electrical service and turndown for the chosen size.
  3. Review building heating demand, supply and return temperatures, required flow and plant staging before choosing replacement capacity.
  4. Confirm the complete equipment order code, fuel, electrical supply, venting, piping, controls and service access.
  5. Include removal, planned service interruptions, commissioning and final equipment documentation in the installation scope.

What Should You Send For A Boiler Quote?

Include the building address, existing boiler and burner nameplates, installation photos, service history and the reason for the proposed work. Share mechanical drawings or the required heating load if available. HTS can help define the assessment, replacement selection and installation scope.

Explore Boiler Repair & Maintenance

Download CAMUS BoilerTechnical Documents Here

Model literature to help plan your boiler replacement or service enquiry.

Manufacturer Literature

Dynaforce heating submittal — 99-0129 Rev.10

Review the published model ratings, dimensions and installation requirements for the selected boiler.

PDF
Manufacturer Literature

Dynaforce installation and service manual — 99-0417 Rev.01

Review the published model ratings, dimensions and installation requirements for the selected boiler.

PDF
Manufacturer Literature

Dynaforce brochure

Review the published model ratings, dimensions and installation requirements for the selected boiler.

PDF
Keep Exploring

More CAMUS Boiler Options

View All Commercial Boilers
Toronto & GTA Building Boilers

Boiler Replacement & Service Questions

Can HTS Help With CAMUS Dynaforce Boiler Replacement?

Send the existing equipment details, building address and project requirements. HTS can discuss a site assessment, the proposed boiler and the work required for removal, installation and commissioning.

Does A Similar Model Number Confirm A Direct Replacement?

No. Model references help identify a family or size. Confirm the full order code, fuel, heating duty, water temperatures, venting, connections, controls and installation requirements before selecting replacement equipment.

Need A New Boiler For Your Building?

Contact HTS with your boiler model and building details. We’ll help you plan the next step.